Enter Traffic Count Averages

Select a traffic count station and select View Module.

Hover over one of the three tabs on the right side of the page (AADT, AWDT, or ADT) to expand the corresponding panel. Select the push pin to dock the window.

Next, select the Add button at the bottom of the panel. A window will appear.

Fill in the fields in the window and select the Save button.

The latest values will show as display only on the dashboard in the Station Information panel.

Enter AADT

See the tutorial on Calculating AADT.

Enter ADT

After entering the Volume History, a window will appear asking “Do you want to enter ADT?” Select Yes or No.

Select No to select the hyperlink Add ADT with the Traffic Volume Count History and the ADT will be tied to that set of counts.

Select Yes to open the Add ADT window. The data is already entered. Select Save.

The difference between the Enter Traffic Count Averages method and the Enter AADT and ADT methods is as follows:

By selecting Add ADT (from Traffic Volume Count History), that ADT is tied to that set of counts.
‎By adding the ADT from the Add button on the ADT tab, that ADT is tied to the station, not a particular set of counts.